Supplied as a dry powder form requiring the addition of fresh potable water on site. For application over Hebel Power Panel & AAC blocks in CSR Hebel – Dulux AcraTex approved coating systems.
- Polymer-Fibre reinforced
- Ready to use after adding water- No wet polymer addition
- Easy of application
- Increased adhesion, Impact and Crack resistence
- Consistent technical properties
- Fast, effecient process
REFER TO THE BAG LABEL FOR DETAILED INFORMATION in conjunction with DULUX AcraTex Application Manual & Duspec data sheet for detailed substrate preperation & application instructions.
DULUX AcraTex Hebel High Build Render is formulated for applications from 4-6 mm in single applications. It can be applied up to 12mm thick in multiple applications. It is engineered for application onto clean sound HEBEL AAC Power Panels and Blocks.
Typical Properties and application data
|Application Guide||Hebel High Build Render is applied by Plastering Technique (Hawk and Trowel) method or via Render Pump in single application from 4-6mm or up to 10mm thick in multiple applications.Thin bed applications requires the addition of 500/4 AcraBond to fresh clean water. REFER TO THE BAG LABEL FOR DETAILED INFORMATION in conjunction with DULUX AcraTex Application Manual & Duspec data sheet for detailed substrate preperation & application instructions.|
|Technology Type||Polymer modified cementicious render|
|Number of coats||1-2|
|WFT (Micron per coat)||3000-4000|
|DFT (Micron per coat)||3000-4000|
|Spread Rate Sqm/L Per coat||0.2|
|Mixing Ratio||5 litres of water per 20kg|
|Pot Life||1 hour|
|Toxicity||Lead free. Forms a non toxic film. Conforms to AS1647.3|
|Recoat Time (25°C,50%R.H.)||7 days|
|Full Cure (25°C,50%R.H.)||7 days|
|Shelf Life||12 months maximium|
|Notes||Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance|